Pavers calculator
12 × 12 in pavers, joints ignored.
Estimate material cost (optional)
Changing the pricing unit clears the unit price. Enter a quote for the newly selected unit.
USD material estimate only; excludes tax, delivery, labor, other project materials and supplier minimums or delivery fees not entered in the comparison above. For bags or boards, match the size in Options. Seed priced per pound does not round up to full packages.
Paver project planner: base, sand and costs
Use the length, width, paver size and extra-paver allowance from the calculator above. Add non-overlapping rectangles under Options. The base normally uses the same footprint; for one rectangle, you can add a base extension below.
Wider base footprint (optional)
Blank or zero keeps the patio footprint. For one rectangle, an extension adds twice its width to both dimensions and affects only gravel base, its allowance and its cost. Use your installation plan's extension. For multiple rectangles, measure the combined base separately to avoid double-counting shared edges.
The 4 in base and 1 in sand defaults are arithmetic examples, not a specified design. Enter depths from your installation plan. Base allowance is a separate volume adjustment; no automatic compaction conversion is applied.
200 sq ft · 200 pavers
Base footprint: 200 sq ft
Gravel base: 2.47 yd³ (66.67 ft³)
Bedding sand: 0.62 yd³ (16.67 ft³)
Includes 0% extra pavers, 0% extra base and 0% extra bedding sand, each applied once. Quantities retain full precision for pricing.
Price the three materials (optional)
Enter valid measurements and all three unit prices. Zero is accepted; leave delivery blank if none applies.
USD estimate for these three materials and entered delivery fees only. Uses whole pavers and unrounded bulk yards. Excludes tax, labor, equipment, supplier minimums, order increments and other materials. Do not add the separate quick paver cost above again.
Uses your current measurements and prices. Choose Save as PDF in your browser’s print options if available.
From patio measurements to a supplier quote
For a 20 × 10 ft patio, 12 × 12 in pavers and 10% extra pavers give 220 pieces. An illustrative 4 in base is 66.67 ft³ (2.47 yd³); a 1 in bedding layer is 16.67 ft³ (0.62 yd³). With 10% extra base, the base order estimate becomes 73.33 ft³ (2.72 yd³). Extra pavers do not automatically increase the base or sand.
At example quotes of $2 per paver, $50 per yd³ of base, $60 per yd³ of sand and $75 combined delivery, that example with 10% extra base totals $687.84. These are illustrative prices, not supplier quotes.
What to ask the supplier to quote
| Material | Quote request |
|---|---|
| Pavers | 220 pieces with the cut allowance. If the supplier sells only packs of 24, quote 10 packs (240 pieces). Ask if singles are available to avoid buying 20 extra. |
| Aggregate base | Quote the loose quantity for a 4 in compacted layer over 200 ft², or 2.47 yd³ of finished layer before allowances. Ask which product to order and how the supplier converts to loose volume or weight. |
| Bedding sand | 0.62 yd³ at the example thickness. If confirmed as the order volume and sold only in half-yard increments, quote 1 yd³. Ask whether bags or bulk are cheaper after delivery. |
The pack size and sale increment are examples. Ask for jointing sand, edge restraints and delivery as separate lines, so you can compare quotes for the same scope. Do not use the earlier 10% base allowance as a conversion from compacted to loose volume.
A wider base needs its own footprint
If your installation plan specifies a base extending beyond the patio, keep the paver and bedding quantities tied to their own footprints. For one rectangular patio, open Wider base footprint above and enter the specified extension in inches. An extension on every side adds twice the extension to both length and width.
| Layer | Footprint | Volume at example depth |
|---|---|---|
| Pavers and bedding | 20 × 10 = 200 ft² | 1 in bedding: 0.62 yd³ |
| Extended base | 21 × 11 = 231 ft² | 4 in base: 2.85 yd³ |
| Additional base only | 231 − 200 = 31 ft² | 4 in base: 0.38 yd³ |
Six inches is 0.5 ft, so the outer dimensions are 20 + 2 × 0.5 and 10 + 2 × 0.5. Entering 6 in in Wider base footprint above replaces the original 200 ft² base with 231 ft²; it does not add a second base layer. Do not add the extended base again. The paver count and bedding sand still use 200 ft². Depths and extension here illustrate arithmetic, not an installation recommendation; volumes exclude extra allowance and compaction conversion.
Check these items before ordering
- Confirm whether base depth is loose or compacted. Ask the supplier for the product-specific loose quantity needed to achieve your specified compacted layer; an arbitrary waste percentage is not a compaction factor.
- For a single rectangle, use Wider base footprint for a uniform extension. For irregular or multiple areas, set that extension to zero and measure the combined base footprint separately with the gravel calculator; do not enlarge the paver area just to buy more base.
- Bedding sand and jointing sand serve different purposes. This volume estimate excludes jointing or polymeric sand; use that product’s coverage for your paver dimensions and joint width.
- Confirm actual or manufacturer-rated paver coverage, pattern mix, pallet quantities, cuts, edge restraints and drainage. This planner assumes one rectangular paver size and ignores joint area.
- Ask about bulk minimums, sale increments and separate delivery charges. Only quantities and fees entered here are priced.
Installation reference: Mutual Materials sand-set paver instructions. Use your product’s installation requirements and site-specific design; this quantity planner does not specify base construction or excavation depth.
How to use this pavers calculator
Pavers = patio area in square feet × 144 ÷ (paver length × width in inches). Apply any extra allowance, then round up.
Example estimate
A 20 × 10 ft patio using 12 × 12 inch pavers needs 200 pavers before extra allowance. A 10% allowance makes that 220 pavers.
Before you order
The calculation ignores joints and assumes one rectangular paver size. Cuts and patterns can change the quantity. Open the Paver project planner to estimate base material, bedding sand and their costs separately. Use Options to add areas or adjust extra material.
Common pavers questions
How many 12 by 12 inch pavers cover 100 square feet?
You need 100 pavers before cuts or extra allowance. With a 10% allowance, the estimate is 110. This assumes each paver measures 12 by 12 inches and ignores joints.
Can I calculate gravel for the paver base?
Yes. Open the Paver project planner above to calculate gravel base and bedding sand from your patio dimensions, with separate depths and allowances. Use the Gravel calculator for a wider base footprint or supplier quotes in tons. Confirm loose versus compacted depth before ordering.
Estimate gravel for your patio base separately.