Gravel calculator
Assumes 1.4 tons per yd³ and 0.5 ft³ bags; match both values to your supplier or package.
Estimate material cost (optional)
Changing the pricing unit clears the unit price. Enter a quote for the newly selected unit.
Compare bulk delivery with bags
Enter both supplier quotes, any bulk minimum and the quantity increment sold. The bulk total includes delivery; the bag total uses the whole-bag result above.
The minimum is applied first, then the payable quantity rounds up to a whole increment measured from zero. For example, 1.1 yd³ needed, a 2 yd³ minimum and 0.5 yd³ increments gives 2 yd³ to buy. If your supplier uses a different ordering rule, confirm the payable quantity directly.
For ton quotes, set Density under Options to your supplier’s tons per cubic yard. A US short ton is 2,000 lb. Compare pickup time, unloading, minimum order quantities and unused material before choosing. Tax, labor and other fees are not included.
USD material estimate only; excludes tax, delivery, labor, other project materials and supplier minimums or delivery fees not entered in the comparison above. For bags or boards, match the size in Options. Seed priced per pound does not round up to full packages.
How to use this gravel calculator
Cubic yards = length × width × depth ÷ 324, with length and width in feet and depth in inches. Multiply cubic yards by the supplier's tons per cubic yard to estimate US short tons.
Round areas: use diameter, not radius
Choose Circle above for a round bed or area. Measure all the way across its center in feet, then enter depth in inches. Cubic yards = π × (diameter ÷ 2)² × depth ÷ 324. For example, a 10 ft diameter circle at 3 inches deep needs about 0.73 cubic yards before extra allowance. Circle covers a full disk. For an empty center, choose Ring and enter both diameters; inside diameter must be smaller than outside diameter. Zero inside diameter gives a full circle.
Under Options, add separate areas to combine circles and rectangles. Measure non-overlapping sections; each can have its own depth. The calculator adds their volumes before applying extra material and rounding bags up.
Example estimate
A 20 × 10 ft area at 3 inches deep needs 1.85 cubic yards. At the default density of 1.4 tons per cubic yard, that is about 2.59 US tons before extra allowance.
Before you order
Gravel density varies by product. Confirm density and whether your specified depth is loose or compacted with the supplier before ordering. Use Options to add areas or adjust extra material.
From measurements to a gravel order: a two-area example
A useful estimate starts with the space you intend to fill. Sketch each section, record its dimensions and mark where sections meet. For a path joining a landing, measure the landing once and stop the path at its edge. Counting the overlap twice inflates the order.
1. Record each area and its fill depth
This example uses a 20 ft by 3 ft path and a separate 10 ft by 4 ft landing, each filled 3 inches deep. Three inches is an arithmetic example, not a recommended construction depth. Use the depth specified for your project and clarify whether it describes loose or compacted material.
| Section | Dimensions | Volume |
|---|---|---|
| Path | 20 × 3 ft × 3 in | 15 ft³ |
| Landing | 10 × 4 ft × 3 in | 10 ft³ |
| Combined | 100 ft² | 25 ft³ |
2. Add the allowance once, then convert
Open Options and add the second area. For an illustrative 10% extra allowance, 25 × 1.10 = 27.5 ft³. Divide by 27 for 1.0185 yd³. At a supplier density of 1.4 US tons per yd³, that is about 1.43 US tons. With 0.5 ft³ bags, it is exactly 55 bags. The calculator retains full precision even when the displayed yard result is 1.02.
The extra percentage is a purchasing choice, not a compaction calculation. Do not add the same allowance to each dimension and again to the final volume. A supplier may specify a different quantity based on the product and site conditions.
3. Compare what you must purchase
Suppose a quote is $50 per yd³, a 2 yd³ minimum and $60 delivery. The payable bulk order is 2 × $50 + $60 = $160, even though the measured requirement with allowance is only 1.0185 yd³. At $4 per 0.5 ft³ bag, 55 bags cost $220. Bulk is $60 cheaper in this example, but leaves about 0.98 yd³ beyond the calculated requirement. These are example prices, not current supplier quotes.
4. Confirm the quote before ordering
- Confirm the exact gravel product and whether pricing is per cubic yard or US short ton.
- Ask for that product's density when converting between weight and volume.
- Check minimum quantities, order increments, delivery charges and where unloading can occur.
- Decide how you will move and use any surplus; delivery savings alone do not measure handling effort.
For a patio, calculate each layer separately. Estimate the paver pieces with the paver calculator; their count does not include gravel base or bedding material.
Gravel for a ring around a circular feature
Measure the outside and inside diameters across the center. Subtract the empty center from the full circle: gravel area in square feet = π × (outside diameter² − inside diameter²) ÷ 4. If you only know the inner diameter and the ring width, add the width twice to get the outer diameter.
For a 10 ft outer diameter and a 6 ft inner diameter, the gravel covers about 50.27 ft². At an example depth of 3 inches, that is about 12.57 ft³ (0.47 yd³), or 26 half-cubic-foot bags before any extra allowance.
To use the calculator above, choose Ring, enter 10 ft outside diameter, 6 ft inside diameter and 3 in depth. The calculator subtracts the empty center automatically. For mulch or soil, choose Ring and enter the same diameters in the mulch or soil calculator with the depth and bag size for that material.
Common gravel questions
How much area does a cubic yard of gravel cover?
One cubic yard is 27 cubic feet. It covers 162 square feet at 2 inches deep, 108 square feet at 3 inches, or 81 square feet at 4 inches. These are volume estimates before compaction or extra allowance.
Is a ton of gravel the same as a cubic yard?
No. A US short ton measures 2,000 pounds of weight; a cubic yard measures volume. At this calculator's default density, one cubic yard weighs 1.4 US tons. Change Density under Options to match your supplier.