Decking calculator
5.5 in boards, 0.125 in gap. Layout and cuts can increase the count.
Estimate material cost (optional)
Changing the pricing unit clears the unit price. Enter a quote for the newly selected unit.
USD material estimate only; excludes tax, delivery, labor, other project materials and supplier minimums or delivery fees not entered in the comparison above. For bags or boards, match the size in Options. Seed priced per pound does not round up to full packages.
How to use this decking calculator
Estimated coverage per board = board length in feet × (actual width + gap in inches) ÷ 12. Divide deck area by that coverage and round up.
Example estimate
A 20 × 10 ft deck using 12 ft boards, 5.5 inches wide with a 0.125 inch gap, gives an area estimate of 36 boards before extra allowance.
Before you order
This is an area estimate, not a cutting plan. Board direction, joints and offcuts may increase your order. It excludes framing, fasteners and railings. Use Options to add areas or adjust extra material.
Check board count against the actual deck layout
The result above is an area estimate. A purchasing check also asks how many board courses cross the deck and how many stock boards are needed to complete each course. This catches waste created when a stock board is shorter than the run.
Example: 20 × 10 ft deck with 12 ft boards
| Check | Calculation | Result |
|---|---|---|
| Area estimate | 200 ft² ÷ 5.625 ft² per board | 36 boards |
| Courses across 10 ft | (120 in + 0.125 in) ÷ 5.625 in | 22 courses |
| Boards per 20 ft course | 20 ft ÷ 12 ft, rounded up | 2 boards |
| Simple layout check | 22 courses × 2 boards | 44 boards |
The eight-board difference is not automatically waste. A cut list may reuse offcuts in later courses, but every end joint must land on suitable framing and the joint pattern must follow the product instructions. Picture-frame borders, diagonal layouts, stairs and unusable damaged ends can add material.
Use this process for your order
- Choose the board direction and measure the run length perpendicular to the supporting joists.
- Calculate course count from the actual face width and required side gap.
- Sketch end joints and border boards, then test whether labeled offcuts can be reused.
- Add only the project allowance you need after the cut layout, and confirm available stock lengths.
The spacing entered above is a project input, not a universal specification. Follow the current instructions for your exact product and fastener system. Reference: TimberTech decking quantity guide.
Common decking questions
Why can my actual deck board order be higher?
The calculator divides area by estimated board coverage. It does not lay out joints or reuse offcuts. Board direction, diagonal patterns and border boards can increase the quantity; check a cutting layout before ordering.
Should I enter nominal or actual board width?
Enter actual face width in inches, board length in feet and your intended gap in inches under Options. For example, a board sold as 6 inches wide may have an actual width of 5.5 inches; confirm your product's dimensions.